|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Macroblock Features Preliminary Datasheet MBI5001 8-bit Constant Current LED Driver * 8 constant-current output channels * Output current adjustable through an external resistor * Serial data in/parallel data out * Output current: 5-90 mA * 20 MHz clock frequency M B I5 0 0 1 C N M B I5 0 0 1 C D Product Description MBI5001, utilizing the most advanced Si technology, is targeted for LED panel display. MBI5001 contains CMOS shift registers and latch functions converting serial input data into parallel output format. At the output stage, eight regulated current sources were designed to provide 5-90 mA constant current for driving LEDs. M B I5 0 0 1 C P MBI5001 provides users with great flexibility and device performance while using the MBI5001 in their LED panel system design. Users may adjust the output current of the MBI5001 through an external resistor, Rext, which gives users flexibility in controlling the light intensity of LEDs. MBI5001 guarantees to endure maximum 17V at the output port, allowing users to connect more LEDs in series. The high clock frequency, 20 MHz, also satisfies the system requirement of high volume data transmission. Terminal Description PIN NO. 1 2 3 4 5-12 13 14 15 16 PIN NAME GND SDI CLK /LE OUT0-7 /OE SDO R-EXT VDD GND terminal Serial data input terminal Clock input terminal Latch input terminal Output terminal Output enable input terminal Serial data out terminal Constant current programming 5V supply voltage terminal FUNCTION Pin Description GND SDI CLK /LE OUT0 OUT1 OUT2 OUT3 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VDD R-EXT SDO /OE OUT7 OUT6 OUT5 OUT4 OMacroblock, Inc. 2003 Floor 6-4, No. 18, Pu-Ting Rd., Hsinchu, Taiwan 30077, ROC. TEL: +886-3-579-0068, FAX: +886-3-579-7534 E-mail: info@mblock.com.tw -1- MBI5001 Block Diagram OUT0 R-EXT I-REG. 8-bit Constant Current LED Driver OUT1 OUT7 /OE Q Q Q ST ST D ST D D /LE SDI D CK Q D CK Q D CK Q SDO CLK Timing Diagram 5V CLK SDI /LE /OE OUT0 OUT1 OUT2 0V 5V 0V 5V 0V 5V 0V On Off Off On Off OUT7 SDO Off 5V 0V Truth table CLK UP UP UP DOWN DOWN /LE H L H X X /OE L L L L H SDI Dn Dn+1 Dn+2 Dn+3 Dn+3 OUT0 Dn Dn+2 Dn+2 OUT5 OUT7 Dn-5 Dn+3 Dn+3 Off Dn-7 Dn+5 Dn+5 SDO Dn-7 Dn-6 Dn-5 Dn-5 Dn-5 NO CHANGE -2- February 2003, V1.2 MBI5001 8-bit Constant Current LED Driver Equivalent Circuit of Inputs and Outputs: 1. /OE terminal VDD 2. /LE terminal VDD /OE /LE GND GND 3. CLK, SDI terminal VDD 4. SDO terminal VDD CLK, SDI 8th LATCH DATA SDO GND GND Maximum Ratings CHARACTER Supply Voltage Output Voltage Output Current Input Voltage GND Terminal Current Clock Frequency Power Dissipation (ON PCB, Ta=25) Thermal Resistance (ON PCB, Ta=25) CN - type CD - type CP - type CN - type CD - type CP - type Topr Tstg Rth(j-a) PD SYMBOL VDD VCE IOUT VIN IGND FCLK RATING 0~+7.0 -0.5~+17.0 +90 -0.4~VDD+0.4 720 20 1.64 1.06 0.88 76 117 141 -40~+85 -55~+150 C C C/W W UNIT V V mA V mA MHZ Operating Temperature Storage Temperature -3- February 2003, V1.2 MBI5001 Recommended Operating Condition CHARACTERISTIC Supply Voltage Output Voltage Output Current SYMBOL VDD VCE IOUT IOH IOL Input Voltage /LE Pulse Width CLK Pulse Width /OE Pulse Width Setup Time for DATA Hold Time for DATA Setup Time for LATCH Hold Time for ENABLE Clock Frequency CN - type Power Dissipation CD - type CP - type PD VIH VIL tw LAT tw CLK tw EN tsetup(D) thold(D) tsetup(L) thold(E) FCLK 8-bit Constant Current LED Driver CONDITION DC Test Circuit SERIAL-OUT SERIAL-OUT - MIN. 4.5 5 0.7VDD -0.3 25 25 400 TYP. 5.0 - MAX. 5.5 17.0 90 -1.0 1.0 VDD+0.3 0.3VDD 20.0 0.85 UNIT V V mA mA mA V V ns ns ns ns ns ns ns MHz VDD=4.5~5.5V 20 15 20 60 Cascade Operation Ta=85C - - - 0.55 0.46 W -4- February 2003, V1.2 MBI5001 Electrical Characteristics CHARACTERISTIC Input Voltage "H" level "L" level SYMBOL VIH VIL IOH VOL VOH IOL1 dIOL1 IOL2 dIOL2 RIN(up) RIN(down) IDD(off) 1 8-bit Constant Current LED Driver CONDITION VOH=17.0V IOL=+1.0mA IOH=-1.0mA VCE =0.8V IO = 40mA VCE = 0.8V VCE =1.2V IO = 80mA VCE = 1.2V Rext =865 (include Skew) Rext =865 Rext =330 (include Skew) Rext =330 MIN. 0.7VDD GND 150 85 0.1 0.1 7.0 10.0 TYP. 40.0 1.5 80.0 1.5 300 200 0.1 0.2 0.2 12.0 22.0 MAX. VDD 0.3VDD 10 0.4 6.0 6.0 600 400 1.0 1.0 1.0 18.0 32.0 UNIT V A V V mA % mA % Output Leakage Current Output Voltage SERIAL-OUT Output Current 1 Current Skew Output Current 2 Current Skew Pull-up Resistor Pull-down Resistor Rext =OPEN OUT0~7=Off K K "OFF" Supply Current IDD(off) 2 Rext =865 OUT0~7=Off IDD(off) 3 Rext =330 OUT0~7=Off mA IDD(on) 1 Rext =865 OUT0~7=On "ON" IDD(on) 2 Rext =330 OUT0~7=On Test Circuit for Electrical Characteristics I DD IIL , I IH 13 3 4 2 VDD /OE CLK /LE SDI R-EXT OUT0 OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 OUT7 GND SDO 5 6 7 8 9 10 11 12 14 I OL V IL , V IH I REF -5- February 2003, V1.2 MBI5001 Switching Characteristics CHARACTERISTIC INn-OUTn Propagation Delay Time ( "L" to "H" ) /LE-OUTn /OE-OUTn CLK-SOUT INn-OUTn Propagation Delay Time ( "H" to "L" ) /LE-OUTn /OE-OUTn CLK-SOUT Pulse Width CLK /LE Set-up Time for LATCH Hold Time for ENABLE Maximum CLK Rise Time Maximum CLK Fall Time Output Rise Time Output Fall Time tswtup LAT thold LAT tr tf tor tof tw CLK-CLK tw LAT-LAT Set-up Time for LATCH Hold Time for ENABLE Maximum CLK Rise Time Maximum CLK Fall Time Output Rise Time Output Fall Time tpHL tpLH SYMBOL 8-bit Constant Current LED Driver CONDITION MIN. 20 VDD=5.0V VCE=0.8V VIH=VDD VIL=GND Rext =865 IOUT=40mA VL=3.4V RL=65 CL=10.5pF 20 15 20 10 10 TYP. 200 200 200 50 200 200 200 50 150 150 MAX. 300 300 300 70 300 300 300 70 20 30 20 25 5 5 200 200 UNIT ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns Test Circuit for Switching Characteristics VIH , V IL SW MATRIX 13 3 4 2 VDD /OE CLK /LE SDI R-EXT OUT0 OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 OUT7 GND SDO 5 6 7 8 9 10 11 12 14 RL CL CL VL -6- February 2003, V1.2 MBI5001 Timing Wave Form 1. CLK, SDI, SDO, OUTn tr CLK 90% 50% 10% 10% 8-bit Constant Current LED Driver tf 90% 50% 50% tsetup SDI t hold 50% 50% tor SDO, OUTn (current) 10% 90% 50% tf 90% 50% 10% t pLH t pHL 2. CLK - /LE CLK 50% SDI "L" level = DATA HOLD 50% /LE t setup 3. /OE - OUTn /OE 50% 50% t pLH OUTn 50% t pHL 50% -7- February 2003, V1.2 MBI5001 Graphs IOUT - Duty on PCB 100 80 60 40 MBI5001CN 8-bit Constant Current LED Driver IOUT - Duty on PCB 100 80 60 40 MBI5001CN Ta = 55C IOUT (mA) 20 0 0 Ta = 25C IOUT (mA) MBI5001CD MBI5001CP VDD = 5V VCE = 1.2V T j(max) = 150C 20 0 VDD = 5V MBI5001CD MBI5001CP VCE = 1.2V T j(max) = 150C 20 40 60 80 Duty - Turn on Rate (%) 100 0 20 40 60 80 Duty - Turn on Rate (%) 100 IOUT - Duty on PCB 100 80 60 40 MBI5001CN Ta = 85C MBI5001 Pd-Ta 1.800 1.600 1.400 1.200 Pd (W/IC) IOUT (mA) 1.000 0.800 0.600 20 0 0 MBI5001CD MBI5001CP VDD = 5V VCE = 1.2V T j(max) = 150C 0.400 0.200 0.000 MBI5001CN MBI5001CD MBI5001CP 20 40 60 Duty - Turn on Rate (%) 80 100 0 20 40 60 80 Ta 100 120 140 160 -8- February 2003, V1.2 MBI5001 Outline Drawings MBI5001 CN 8-bit Constant Current LED Driver DIP-16-P-300-2.54 Units: mm Weight: 1.02g (typ) MBI5001 CD SOP-16-P-150-1.27 Units: mm Weight: 0.13g (typ) MBI5001 CP SSOP-16-P-150-0.64 Units: mm Weight: 0.07g (typ) -9- February 2003, V1.2 |
Price & Availability of MBI5001CD |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |